Supporting Kit and Part Distributors and Installers world wide LPG, CNG & LNG

Download Brochure Contact with us

Manufacturing and Supplying 100,000s

of AutoGas Components since 1990

AMR Manufacturing is a high quality manufacturer and importer of LPG Automotive Gas conversion parts and kits in Australia. With over 25 years of industry sales and distribution we have one of the largest rage of LPG auto-gas parts and conversion kits found anywhere worldwide.

LPG FILLERS

LPG/CNG/LNG INJECTORS

LPG/LNG REDUCERS

DIESEL BLEND LPG/CNG/LNG INJECTOR RAILS

DUAL LPG TANK TEE VALVE

LPG/PETROL LOCK OFFS AND VENT HOSE FLANGES

Manufacturing and Supplying 100,000s

of Components since 1990

Company Products

Quality Testing

Submerging products in water under air pressure to ensure no leaks in both LPG and water passages. Lock pressure opening test and bar pressure outlet is set to 1.5 bar

Regent St Testimony

Certifications
Reducer/Regulator
Printable PDF
Filling Valves
Printable PDF
Hydrostatic Tee
Printable PDF

01.

Certified

Components have been with manufactured with partners that have ISO 9001:2015 standards following the scope Repetition engineering Services and related sub-assembllies

Certificate NO: QEC4788

Download PDF

Download PDF

Download PDF

Download PDF

Download PDF

Download PDF

AutoGas Components Sold World Wide

From New Zealand to the United Kingdom. From Australia to Canada and USA. From small 4 Cylinder motors to V10 motors, Taxis, Trucks, Buses and Police vehicles AMR products are being used with Proven Reliability and Perfomance for over 30 years.

Canada

Trucks and V10 Motors
including Police Vehicles

UK

Taxi Industry

USA

A Range of Vehicles

France

Trucks and V10 Motors

New Zealand

Range of Vehicles

Thailand

Large Motors
Vehicles Installations

Australia

Over 600,000
Components Sold

Germany

Trucks and V10 Motors

Australian Made Components from Reducers/Converters, Injectors, Filling Valves and Specialized Components.

2 Up or 4 Up Injector Rail Assembly for Diesel blend systems and universal applictions, different size inlet and outlet fittings available for LPG/CNG or LNG

Acme Filler Range for Panel installations and Universal installations with a range of fittings available

LPG Euro Filler for Panel installations and Universal with a range of different fittings

LPG Dish Filler for Panel and Universal installations with a range of different fittings

AMR AUTOGAS LPG Fillers have been designed to have either 30mm or 50mm ventilation tube secured directly onto the back of the filler as and when needed

Gas Lock Off Solenoid Valve

Petrol Lock Off Solenoid Valve 12 or 24 Volt

LPG Number Plate Tags

Hydrostatic Tee Valve
Dual Tank T Valve

4 Up and 3 Up LPG, CNG, LNG Injectors

2 Up and 1 Up LPG, CNG, LNG Injectors

M7 Reducer Rated to 620HP

50mm Ventillation Hose Pieces & Flanges

Designed, Developed and Manufactured at the Australian Plant by 3 Engineers with more than 60 years experience.

Director of AMR Autogas Michael La Greca

George Kolecsanyi from Cad Cam services

Majeed Ariketty from DOAT Tech Pty Ltd

Inside the Factory

Injector Assembly Staging

Injector Flow Test

Injector Housing Crimp Station

Injector Housing Heat State Station

Injector Leak Test

Injector Packing

Injector Solenoid Over Mold Station

M7 Leak Test Station

M7 Packing

M7 Reducer Assembly Station

Solenoid Soldering

Solenoid Stem Assembly Station

Solenoid Stem Leak Testing

Solenoid Winding Station

years EXPERIENCE

more than 35 years of experience in designing and manufacturing quality mechanical components for automotive LPG and CNG equipments - made in Italy

market PRESENCE

exporting in more than 40 markets all over the world, our company is considered one of the leader of our industry

million valves per year PRODUCTION CAPACITY

Our company reached the worldwide leadership, in terms of quantity, types of version and capacity. High flexibility and lean processes allow to reply to any request in time.

international PARTNERS

2 joint-ventures with local partners, to support our international business in order to reinforce our presence in important foreign markets

M7 Reducer

The M7 is the most powerful LPG Reducer in the world and can supply 455 Kilo WATT. 620 Horse power motors as per testing on the large V8 Toyota Tundra in Canada , they have also been installed on large motors that TOW Horse floats and or motor Homes in minus 40 degrees conditions.

LPG, CNG, LNG Vapour Injectors

Versatile small motors to large V10 motors.

LPG, CNG, LNG Vapour Injectors

Flow Testing, how they are tested on a purpose, specially designed Flow Test Machine.

Injector Cleaning

How to clean LPG, CNG, LNG AMR Injectors

Hydrostatic Tee Valve Duel LPG Tank Tee Valve

The Hydrostatic Tee Valve has been design to have the service line of both LPG Tanks connect to it and then have one outlet its function is to open or release pressure if and when the combined pressure of both LPG Tanks exceeds 3.1Mpa according to the Countires realavent standards.

Testimonials What Clients Say

Rapidiously morph transparent internal or "organic" sources whereas resource sucking e-business. Conveniently innovate compelling internal.

Assertively procrastinate distributed relationships whereas equity invested intellectual capital everything energistically underwhelm proactive.

5.0 BizBite

Austin Cesar

ThemeTags

Intrinsicly facilitate functional imperatives without next-generation meta-services. Compellingly revolutionize worldwide users vis-a-vis enterprise best practices.

5.0 BizBite

Pirtle Karol

ThemeTags

Interactively grow backend scenarios through one paradigms. Distinctively and communicate efficient information without effective meta-services.

5.0 BizBite

Aminul Islam

ThemeTags

Frequently Asked Questions

LPG, CNG, LNG Injectors

How do they come 3 or 4 together?

They can come in either 1 by themselves or 2, 3 or 4 together they have been designed to join each other.

Can they supply large V8 Motors?

Yes they can supply large 620 Horse Power motors and more as we manufacture and flow test them we can make them flow a lot higher than standard.

Are there different size hose connectors available?

Yes 10mm, 12, 14 and 16.

Can ends be swapped on them like a plug or feed tube?

Yes.

What if one injector is faulty missing or leaking?

Try Opening the Injector a 2mm pin punch to push out mount pins and cleaning the injector as deposits from oil in gas may be building up in areas and decreasing flow and or stuck on seal and or seat when assembling pins use a 3mm pin punch and apply small amount of silicon on end of small diameter of pins then insert to housing again LPGas can vary from country to country and dirty fuel can cause issues on injectors as they are finely tuned and pulsate inside the injector millions of times at a small travel distance.

Can the Injectors be dismantled to be cleaned?

Yes they can.

Are the Injectors available with temperature sensors?

Yes they are.

Are the injectors available with different size nozzles to assist in tuning?

Yes in different color nozzles represent different size holes for flow variation.

Are replacement O-rings available for the injectors?

Yes.

Is each injector flow tested?

Yes.

Are they compact and easy to install?

Yes and rubber vibration mounts are available to mount onto the mount lugs on the injector.

What is the warranty period?

3 Years.

LPG Reducer, Regulator

Does the M7 Reducer handle increase boost pressure and turbo charged engines.?

Yes it does as it works of engine Vacuum and has a 620 Plus Horse power capacity.

IS the gas lock off solenoid available with terminal and or Plug?

Yes available in both variations also available in 12 Volt and or 24 Volt.

Is the temperature Sensor available with different OHMS readings.?

Yes the temperature Sensor is available with the most common OHMS reading thermistor used worldwide and a lower 1.5 OHMS thermistor for Prins and BRC compatibility it is also available with the standard square plug and AMP oval plug.

Is the vapor outlet fitting available in different sizes.?

Yes to suit 10mm, 12, 14 and 16mm inside diameter hoses.

Are repair kits and replacement internal filters available?

Yes both repair kits and inlet replacement filters are available separately.

Can the M7 Reducer withstand a lot of heat and extreme cold?

Yes the M7 is designed to withstand being on vehicles that do not turn off its unique design does not allow casting expansion to crush the rubber gaskets and its internal flow design allows it to heat the reducer in extreme cold conditions to still vaporize the LPG Liquid to a GAS.

What is the warranty period?

3 YEARS.

Does the M7 come with a mount bracket and mount stud?

Yes.

Where is the M7 reducer manufacture red?

AUSTRALIA

Are replacement orings available for the brass water and vapor outlets?

YES.

Supporting Kit and Part Distributors and Installers world wide LPG, CNG & LNG

Manufacturing and Supplying 100,000s

of AutoGas Components since 1990

LPG FILLERS

LPG/CNG/LNG INJECTORS

LPG/LNG REDUCERS

DIESEL BLEND LPG/CNG/LNG INJECTOR RAILS

DUAL LPG TANK TEE VALVE

LPG/PETROL LOCK OFFS AND VENT HOSE FLANGES

Manufacturing and Supplying 100,000s

of Components since 1990

Company Products

Quality Testing

Regent St Testimony

Certified

AutoGas Components Sold World Wide

Canada

UK

USA

France

New Zealand

Thailand

Australia

Germany

Australian Made Components from Reducers/Converters, Injectors, Filling Valves and Specialized Components.

Designed, Developed and Manufactured at the Australian Plant by 3 Engineers with more than 60 years experience.

Director of AMR Autogas Michael La Greca

George Kolecsanyi from Cad Cam services

Majeed Ariketty from DOAT Tech Pty Ltd

Inside the Factory

years EXPERIENCE

market PRESENCE

million valves per year PRODUCTION CAPACITY

international PARTNERS

M7 Reducer

LPG, CNG, LNG Vapour Injectors

LPG, CNG, LNG Vapour Injectors

Injector Cleaning

Hydrostatic Tee Valve Duel LPG Tank Tee Valve

Testimonials What Clients Say

5.0 BizBite

Austin Cesar

5.0 BizBite

Pirtle Karol

5.0 BizBite

Aminul Islam

Frequently Asked Questions

LPG, CNG, LNG Injectors

How do they come 3 or 4 together?

Can they supply large V8 Motors?

Are there different size hose connectors available?

Can ends be swapped on them like a plug or feed tube?

What if one injector is faulty missing or leaking?

Can the Injectors be dismantled to be cleaned?

Are the Injectors available with temperature sensors?

Are the injectors available with different size nozzles to assist in tuning?

Are replacement O-rings available for the injectors?

Is each injector flow tested?

Are they compact and easy to install?

What is the warranty period?

LPG Reducer, Regulator

Does the M7 Reducer handle increase boost pressure and turbo charged engines.?

IS the gas lock off solenoid available with terminal and or Plug?

Is the temperature Sensor available with different OHMS readings.?

Is the vapor outlet fitting available in different sizes.?

Are repair kits and replacement internal filters available?

Can the M7 Reducer withstand a lot of heat and extreme cold?

What is the warranty period?

Does the M7 come with a mount bracket and mount stud?

Where is the M7 reducer manufacture red?

Are replacement orings available for the brass water and vapor outlets?

Hydrostatic Tee valve

Does the Hydrostatic Tee valve draw from both LPG Tanks equally?

Has the Valve been certified?

What pressure will it release and can the pressure be altered?

LPG Filler Valves

Are the fillers easy to install?

Are replacement internal one way check valves available separately?

Are the Fillers Certified?

Are Replacement cap with retainers available separately?